LS2 V6-3.0L VIN R (2000)
2.
Remove the air cleaner hose assembly from the throttle body.
3.
Disconnect the throttle body electrical connection.
4.
Remove electrical connection and vacuum hoses from intake plenum switch over valve solenoid.
5.
Remove the vacuum hose from the fuel pressure regulator.
6.
Remove the front intake plenum hose clamps, pipe bolts, and plenum bolts.
7.
On 2000-2003 vehicles only, remove EGR pipe bolts and pipe from intake plenum.
8.
Lift the plenum and remove the throttle body heater hoses.
