LS2 V6-3.0L VIN R (2000)
Accelerator Pedal: Service and Repair
REMOVAL
1. Remove lower I/P hush panel.
2. Disconnect accelerator pedal position sensor electrical connector.
3. Depress accelerator pedal and remove upper bracket-to-front of dash attachment nut.
4. Remove remaining accelerator pedal bracket-to-front of dash attachment nuts.
5. Remove pedal assembly from vehicle.
IMPORTANT: Do not remove the linkage arm from pedal position sensor as it will be difficult to orient the arm in the same position. Accelerator
pedal travel will be effected.