LS2 V6-3.0L VIN R (2000)
Fuel Injector: Description and Operation
The Sequential Fuel Injection (SFI) fuel injector assembly is a solenoid operated device, controlled by the ECM, that meters pressurized fuel to a single
engine cylinder. The ECM energizes the (12.0 volt) solenoid to open a normally closed ball valve. This allows fuel to flow into the top of the fuel
injector, past the ball valve, and through a recessed how director plate at the injector outlet. The director place has six machined holes that control the
fuel spray, generating a conical spray pattern of finely atomized fuel at the valve, causing it to become further atomized and vaporized before entering
the combustion chamber.
A fuel injector that is stuck partly open or leaking would cause a loss of fuel pressure after engine shut down, so long crank times would be noticed on
some engines. Dieseling also could occur because some fuel could be delivered to the engine after the ignition is turned to the Off position.
All Saturn fuel injectors are designed for a specific engine. They are not interchangeable between each engine option. When servicing the fuel injectors,
ensure that the correct injector is used for the specific engine.
