LS2 V6-3.0L VIN R (2000)
CAUTION:
THE FUEL TANK HEAT SHIELD HAS SHARP METAL EDGES. CARE MUST BE USED WHEN WORKING AROUND FUEL TANK HEAT
SHIELD TO AVOID PERSONAL INJURY.
4.
Install parking brake cables to underbody hooks at front of fuel tank.
5.
Install two rearmost chassis fuel bundle retainers to underbody studs. Push the retainers onto underbody studs and tighten retainer screws.
Torque: 10 Nm (89 in-lbs)
6.
Install exhaust heat shield.
Torque: 4 Nm (35 in-lbs)
7.
Install rubber exhaust pipe isolators.
8.
Install fuel tank bracket (fuel line stone chip guard).
Torque: 10 Nm (89 in-lbs)