LS2 V6-3.0L VIN R (2000)
5.
Install 3/8" x 1/4" quick connect (1) adapter from flow/pressure adapter (SA9127E-7) into fuel feed line.
6.
Connect suitable drain hose to other end of adapter and connect drain hose to certified fuel handling cart.
7.
Energize fuel pump using Scan tool. (Refer to Tech 2 User Guide for proper Scan tool navigation and setup.)
8.
Pump out fuel until no more fuel flows from line.
9.
Lower vehicle.
Partially Lower Fuel Tank
CAUTION:
DO NOT ALLOW SMOKING OR THE USE OF OPEN FLAME IN THE AREA WHERE WORK ON THE FUEL SYSTEM IS TAKING PLACE.
CAUTION:
ANY TIME THE FUEL SYSTEM IS BEING WORKED ON, DISCONNECT THE NEGATIVE BATTERY CABLE, EXCEPT FOR THOSE
TESTS WHERE BATTERY VOLTAGE IS REQUIRED.
NOTICE:
Fuel tank needs to be drained prior to fuel tank being lowered. If fuel tank is not drained, fuel line damage may result.
1.
Disconnect negative battery cable.
2.
Raise vehicle to a comfortable working position.
NOTICE:
On vehicles equipped with L81 (V-6) engine only, support catalytic converter. If catalytic converter is allowed to hang unsupported, exhaust system
damage may occur.
3.
Remove exhaust system intermediate pipe (with muffler).
