LS2 V6-3.0L VIN R (2000)
5.
Remove fuel filler pipe lower bracket attachment screw.
CAUTION: Whenever Fuel Lines Are Removed, Place Fuel In An Approved Container. Container Opening Must Be A Minimum Of 300 MM (12 IN.)
Diameter To Adequately Catch Fuel.
6.
Disconnect EVAP canister vent hose.
7.
Disconnect quick connect at recirc. line.
8.
Loosen fuel filler pipe hose clamp closest to fuel tank.
9.
Disengage fuel filler pipe hose from fuel tank.
10.
Remove tank grounding strap attachment nut from stud located near fuel filter.
11.
Disconnect fuel tank electrical connection and remove connector from underbody.
12.
Remove fuel tank strap bracket protecting fuel line connections between fuel tank and chassis fuel bundle.
CAUTION: Whenever Fuel Lines Are Removed, Place Fuel In An Approved Container. Container Opening Must Be A Minimum Of 300 MM (12 IN.)
Diameter To Adequately Catch Fuel.
