LS2 V6-3.0L VIN R (2000)
8.
Loosely install filler pipe lower bracket attachment screw but do not tighten.
IMPORTANT: To ease installation, lightly wipe the outside of the fuel tank inlet connector with water.
9.
Install fill neck to fuel tank.
NOTICE: Ensure that the fuel pipe connecting hose is installed until it touches the fuel tank body. The hose clamp should be located within 6 mm (1/4
in.) of the end of the connector hose.
10.
Tighten hose clamp on filler pipe to fuel tank connecting hose.
Torque: 5 N.m (44 in-lbs)
