LS2 V6-3.0L VIN R (2000)
11.
Connect EVAP canister vent pipe to canister vent hose at quick connect and recirc line at quick connect.
12.
Tighten lower attachment screw on filler pipe to underbody.
Torque: 13 N.m (9.5 ft-lbs)
13.
Install heat shield.
Torque: 7 N.m (62 in-lbs)
14.
Install intermediate pipe (with muffler).
Torque: 20 N.m (15 ft-lbs)
15.
Lower vehicle.
16.
Add fuel to fuel tank.
17.
Connect negative battery cable.
Torque: 17 N.m (13 ft-lbs)
18.
Prime fuel system.
a.
Using ignition, cycle switch On for 5 seconds and then Off for 10 seconds. Repeat this twice.
