LS2 V6-3.0L VIN R (2000)
IMPORTANT:
Passenger inflator module wiring harness must be routed between round guide pin and module mounting ear.
25.
Insert inflator module guide pins into I/P brace slots and rotate round edge upward to align bolt holes.
26.
Install passenger inflator module to I/P bracket fasteners.
Torque: 10 N.m (89 in-lbs)
27.
Connect yellow 2-way connector to vehicle wiring harness.
28.
Install glove compartment partially into opening.
29.
Install BCM to glove compartment by sliding module into attaching slots.
