LS2 V6-3.0L VIN R (2000)
3. Remove rear transaxle mount through bolt, and transaxle mount-to-frame bolt.
4. Place an approved drain container under pressure and return hoses at steering gear.
5. Remove power steering pump pressure and return hoses from steering gear and allow system to drain.
CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON HOIST. TO HELP AVOID
PERSONAL INJURY, PROVIDE SUPPORT TO THE OPPOSITE END OF THE VEHICLE THAT COMPONENTS WILL BE
REMOVED FROM.
6. Raise vehicle on hoist.
7. Remove front wheel and tire assemblies.
8. Remove right front lower splash shield.
