LS2 V6-3.0L VIN R (2000)
4. Install new cage nuts for suspension supports. Torque retention of old nuts may not be sufficient.
5. Install suspension supports using new bolts and tighten.
Torque: 90 Nm (66 ft. lbs.) + 45 - 60°
NOTICE: New bolts must be used as torque retention of old bolts may not be sufficient.
6. Using new bolts, install steering gear to frame.
Torque: 45 Nm (35 ft. lbs.) + 45 - 60°
7. Vehicles equipped with L61 engines and automatic transaxle, install steering gear heat shield.
Torque: 4 Nm (35 inch lbs.)
IMPORTANT: The tie rod ends must be thoroughly cleaned before installing and tightening.
8. Install tie rod end into steering knuckle.
