LS2 V6-3.0L VIN R (2000)
9. Remove inflator module.
10. Disconnect cruise control (if equipped) switch connection and disconnect harness from steering wheel.
11. Remove steering wheel attachment nut and discard.
12. Install Steering Wheel Puller (KM-210-C or equivalent).
13. Remove steering wheel while feeding the wiring through the wheel opening.
NOTE: Always align the front wheels to the straight-ahead position when installation or removing a coil assembly. If a coil is removed without the
wheels in a straight-ahead position and steering wheel has not been moved, the same coil assembly can be reinstalled if coil hub has not been rotated.
NOTE: If yellow tab is not available, use tape to prevent SIR coil from rotating.
