LS2 V6-3.0L VIN R (2000)
6. Remove both stabilizer bar links from rear axle control arms.
CAUTION: FAILURE TO SUPPORT THE REAR SUSPENSION SUPPORT ASSEMBLY CAN CAUSE SUSPENSION SUPPORT TO
DROP TO THE GROUND WHEN MOUNTING BOLTS ARE REMOVED.
CAUTION: SUPPORT THE FRONT OF THE VEHICLE TO ENSURE THAT THE VEHICLE WILL NOT BECOME UNBALANCED
AND TIP FORWARD, OFF THE HOIST, ONCE THE REAR SUSPENSION SUPPORT IS REMOVED (DUE TO DECREASED
PROPORTION OF REAR VEHICLE MASS). FAILURE TO SUPPORT FRONT OF VEHICLE COULD CAUSE VEHICLE TO FALL
OFF THE HOIST.
7. Support rear suspension support with a suitable support stand.
8. Remove the four rear suspension support to body bolts and discard bolts.
9. Remove rear suspension support from vehicle.
DISASSEMBLY
-
TOOLS REQUIRED
-
KM-906-B- Bushing Remover Installer
