LS2 V6-3.0L VIN R (2000)
1. Attach carrier to body with carrier-to-body bolts.
Torque: 55 Nm (40 ft. lbs.)
NOTICE: Use a new bolt; Torque retention of old bolt may not be sufficient.
2. Install the carrier assembly to knuckle using a new bolt.
Torque: 150 Nm (110 ft. lbs.) plus 30 degrees
3. Install wheelhouse liner assembly.
NOTICE: Before installing wheels, remove rust or corrosion from wheel mounting surfaces and brake rotors. Failure to do so can cause wheel bolts
to loosen in service.
4. Install wheel and tire assemblies onto hub
