LS2 V6-3.0L VIN R (2000)
7. Install and hand start lower side cover-to-transaxle case bolts and tighten.
Torque: 20 Nm (15 ft. lbs.)
8. Install left transaxle mount bracket to transaxle.
Torque: 90 Nm (66 ft. lbs.)
9. Install power steering lines to left transaxle mount bracket.
Torque: 10 Nm (89 inch lbs.)
NOTICE: In order to prevent damage to axle shaft splines during vehicle operation, add grease (P/N 7843867) to axle shaft splines prior to axle shaft
installation.
10. Install a new axle retaining clip on output shaft of transaxle. Untie left axle shaft and install axle shaft into transaxle.
11. Install frame assembly.
12. Lower vehicle.
13. Install left transaxle mount to engine compartment rail.
Torque: 20 Nm (15 ft. lbs.)