LS2 V6-3.0L VIN R (2000)
6.
Install the 14 mm wiper motor crank arm (provided with the replacement linkage), aligning it in between the alignment marks on the linkage
mounting plate.
7.
Install crank arm washer and nut.
Torque:
Wiper Motor Crank Arm Nut: 15 - 20 N.m (11 - 15 ft-lbs)
8.
Install linkage connecting arm-to-wiper motor crank arm ball stud.
9.
Refer to the "Wiper/Washer" section of the applicable year Body/Electrical Volume II Service Manual for installation of the linkage and motor to
vehicle.
PARTS REQUIREMENTS
CLAIM INFORMATION:
To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System for B1789 (Link, Wiper
Windshield (One or Both) - R&R or Replace) or N3520 (Motor, Wiper, Windshield - Replace), refer to the appropriate Electronic Labor Time Guide for
the correct Labor Operation Code and Time.
DISCLAIMER