LW100 L4-2.2L VIN F (2002)
THICKNESS CHART
IMPORTANT: Refer to "Inspecting and Refinishing Brake Rotors". See: Inspecting and Refinishing Brake Rotors
INSTALLATION
1. Install brake rotor onto wheel hub.
2. Tighten rotor retaining screw.
Torque:
Brake Rotor Retaining Screw: 4 Nm (35 inch lbs.)
NOTICE: Clean caliper support bracket fasteners thoroughly with brake and choke cleaner (P/N 21007432 or equivalent). Apply Loctite 272 (R)
Threadlocker (or equivalent) to caliper support bracket fasteners. If Loctite 272 (R) Threadlocker (or equivalent) is not available, new caliper support
bracket fasteners must be used.
3. Install caliper bracket-to-steering knuckle bolts.
Torque:
