LW2 V6-3.0L VIN R (2000)
4. Remove the plastic retainers from the rear wheelhouse panel to the fascia.
5. Remove the bolts from the rear wheelhouse panel to the fascia.
6. Remove the fascia by sliding rearward.
Installation Procedure
1. If installing a new fascia, transfer the rear bumper fascia outer reinforcement and filler.
2. Install the fascia over the bumper assembly. Engage the fascia ends (key slots) over the stubs extending down from the quarter panel and push the
fascia forward to lock the fascia quarter panels.
3. Install the plastic retainers to the bumper filler.