LW2 V6-3.0L VIN R (2000)
30.
While holding the door handle assembly, connect the tweeter speaker wiring harness.
31.
If equipped, route power door lock wiring harnesses through the door handle opening.
32.
Install door handle with door handle fasteners tucking door handle under door pad upper weatherstrip.
Tighten
Tighten the fasteners to 1.2 Nm (10 in lb)
33.
Snap door handle grip into place.
34.
Snap tweeter speaker cover into place.
35.
Snap mirror patch into place.
36.
On non-power mirror-equipped vehicles, snap covers into place.
37.
On power-equipped vehicles, connect power window and power mirror switch harness and snap switches into place.
38.
On vehicles so equipped, function power mirror, windows, locks and speakers for proper operation.
39.
Affix Campaign Completion Label on a clean and dry surface of radiator core support, in an area clearly visible when hood is raised. (For more
information, refer to "CAMPAIGN COMPLETION LABEL" in this bulletin.)