LW2 V6-3.0L VIN R (2000)
1. Using bushing remover/installer KM-906-7O, KM-906-11, and KM-906-12A press out the rear suspension support bushings
ASSEMBLY
1. Using bushing remover/installer KM-906-70, KM-906-13A, and KM-906-14 press in new damping bushings.
INSTALLATION
1. Raise rear suspension support assembly into vehicle and install using new bolts.
Torque: 90 Nm (66 ft. lbs.) + 90 to 115°
