LW2 V6-3.0L VIN R (2000)
1. Transfer the dome lamp to the new headliner assembly.
2. Connect the dome lamp connection
3. If equipped with Onstar, transfer the microphone and bezel to the new headliner. Connect the microphone wiring harness.
4. Position the headliner to the proper location and press on the dome lamp to secure the headliner to the roof structure.
5. Install the sunshade inner retainer clip.
Notice: Refer to Fastener Notice in Cautions and Notices.
Tighten the inner sunshade support fasteners to 15 N.m (11 lb ft).
6. Connect the sunshade wiring harness if the vehicle has an illuminated sunshade.
7. Install the sunshade assembly.
Tighten the sunshade-to-headliner fasteners to 15 N.m (11 lb ft).
