LW2 V6-3.0L VIN R (2000)
Trunk / Liftgate Lock: Service and Repair
Liftgate Lock Cylinder Coding
REMOVAL
1. Remove E-clip at rear of lock cylinder and remove pawl.
2. Remove switch lever and return spring.
3. Compress inside snap ring and remove. Remove washer plate and compression spring.
4. Remove lock cylinder from liftgate lock cylinder housing.
5. Remove cap and gasket from lock cylinder.
IMPORTANT: When shutter is removed, the shutter springs may fall out.
6. Remove shutter and shutter springs.
7. Insert key into cylinder, turn it a quarter turn clockwise and remove cylinder from housing.
IMPORTANT: When the tumblers are removed from the lock cylinder tumbler, springs may fall out.
