LW2 V6-3.0L VIN R (2000)
16.
Install power seat riser motor to new seat adjuster.
Torque:
Power Seat Height Adjuster Motor-to-Seat
Adjuster Fasteners: 15 Nm (11 ft-lbs)
17.
Install seat back assembly.
Torque:
Recliner Fasteners: 35 Nm (26 ft-lb.)
IMPORTANT:
Note the location of wiring routing. Improper wiring harness routing can cause electrical wiring chafes which will result in power seat failure.
18.
On power equipped vehicles position seat wire harness to seat carrier assembly properly routing and strapping harness to seat carrier.
19.
Install seat cover 3-strip to seat adjuster, position seat adjuster to seat cushion carrier and secure with fasteners.
Torque:
Seat Cushion Carrier-to-Seat Adjuster
Fasteners: 20 Nm (15 ft-lbs)
20.
Clip wiring harness to seat carrier frame.
