LW2 V6-3.0L VIN R (2000)
3.
With an assistant, apply an unrestricted (no nozzle) flow of water from the engine compartment side to the suspected area.
4.
Inspect for water entering the vehicle at the dash-to-floor pan seam.
5.
Seal the seam using KENT Industries Quick Seal (P/N 10552) or equivalent, and allow to cure.
6.
Water test area to verify repair.
7.
Install carpet. (Refer to "Front Floor Carpet" installation procedure in the Interior Trim section of the 2000 - 2001 or 2002 L-Series
Body/Electrical volume II Service Manual.)
PASSENGER COMPARTMENT - COWL
(DIE NOTCH) SEAM (SEDAN AND
WAGON)
1.
Remove carpet. (Refer to "Front Floor Carpet" removal procedure in the Interior Trim section of the 2000-2001 or 2002 L-Series Body/Electrical
Volume II Service Manual.)
2.
Remove air inlet grill panel fasteners and panel.