LW2 V6-3.0L VIN R (2000)
Brake Pad: Service and Repair
Brake Pads Replacement - Front
REMOVAL
CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON HOIST.
1. Raise vehicle on hoist.
2. Remove front wheel and tire assemblies.
3. Pry off locking plate and remove brake pressure hose from strut.
4. Remove pad retainer spring.
NOTICE: Do not let weight of caliper hang on brake hose as this could damage the brake hose. Use mechanics wire to tie caliper to strut.
5. Remove caliper-to-bracket guide pins.
6. Remove caliper assembly.
