LW2 V6-3.0L VIN R (2000)
Brake Rotor/Disc: Specifications
BRAKE ROTORS
Brake Rotor Retaining Fastener
35 in.lb
Front
Lateral Runout
0.001 in
Thickness Variation
0.0003 in
Diameter
11.3 in
New Thickness (Nominal)
0.98 in
Minimum Thickness After Refinish
0.90 in
Discard Thickness
0.87 in
*Brake drums and rotors have a discard diameter or
thickness dimension cast into them. This is a wear
dimension and not a refinish dimension. Any drum or rotor
which does not meet the specification values should be
discarded.
Rear
Lateral Runout
0.001 in
Thickness Variation
0.0004 in
Diameter
11.25 in
New Thickness (Nominal)
0.39 in
Minimum Thickness After Refinish
0.35 in
Discard Thickness
0.31 in
*Brake drums and rotors have a discard diameter or
thickness dimension cast into them. This is a wear
dimension and not a refinish dimension. Any drum or rotor
which does not meet the specification values should be
discarded.