LW2 V6-3.0L VIN R (2000)
4. Install brake pipe onto wheel cylinder.
Torque: 16 Nm (12 ft. lbs.)
5. Completely assemble rear drum brakes.
NOTICE: Before installing wheels, remove rust or corrosion from wheel mounting surfaces and brake rotors/drums. Failure to do so can cause
wheel bolts to loosen in service.
6. Position wheel and tire assembly onto hub.
7. Install wheel bolts and tighten in a crisscross pattern. Repeat tightening pattern to be sure torque is correct.
Torque: 125 Nm (92 ft. lbs.)
8. Lower vehicle from host.
9. Bleed brakes.