LW2 V6-3.0L VIN R (2000)
Parking Brake Cable: Service and Repair
Park Brake Cable
REMOVAL
1. Release park brake.
2. Remove park brake boot by squeezing boot on sides while pulling upwards.
3. Loosen park brake adjuster nut to provide ample slack in park brake cable.
CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON HOIST.
4. Raise vehicle on hoist.
5. Disconnect exhaust resonator from exhaust manifold pipe.
6. Remove exhaust pipe-to-body insulators.
7. Lower exhaust resonator pipe and muffler assembly from vehicle.