LW2 V6-3.0L VIN R (2000)
Radiator Hose: Service and Repair
Upper Radiator Hose
REMOVAL
1. Disconnect negative battery cable.
2. Drain coolant. (Refer to "Draining Coolant".)
3. Compress upper radiator hose to engine clamp and slide hose off of engine fitting, leaving clamp on fitting.
4. Remove upper radiator hose to radiator clamp and remove hose from radiator.
INSTALLATION
IMPORTANT: Engine end of hose is labeled to prevent reverse installation. White line on hose should be installed at 12 o'clock position.