LW2 V6-3.0L VIN R (2000)
13.
Install bolt and nut through Valve Spring Compressor J43952 (2 each) and position bolt and nut towards exhaust side of slot in J43952 as shown
(rear cylinder head shown).
14.
Install Spark Plug Adapter 309729 from Universal Pressure Test Kit into spark plug port.
Caution:
Wear safety glasses when using compressed air in order to prevent eye injury.
15.
Assemble Universal Pressure Test Kit components:
309726 and 309734 from SA9127E and install on vehicle to pressurize combustion chamber.
16.
Use Spring Compressor Arm SA9124E-2 and Pivot Bar SA9124E-4 from Engine Kit SA1991E1, Case 1 of 1 and Valve Spring Compressor
J43963 from 3.0L V-6 Engine Kit J43930 Case 1 of 2 and install as shown.
