LW2 V6-3.0L VIN R (2000)
2. Check that the tensioner turns smoothly and that no binding occurs in the bearing.
Installation Procedure
1. Remove the crankshaft locking tool. This will ease installation of the timing belt.
Important: With the camshaft locks installed, verify that distance between camshaft sprockets with green test belt located in the J42069.
2. Start at #1 and #2 camshaft sprockets, route belt around #1 and #2 sprockets while aligning belt marks to the marks on the sprocket and the rear
cover.
3. Install the belt around the timing belt tensioner.
4. Route the belt around the upper idler pulley.
5. Route the belt around #3 and #4 camshaft sprockets while aligning the belt marks to the marks on the sprockets and the rear cover.
6. Route the belt around the crankshaft hub sprockets while aligning the marks on the belt to the marks on the sprockets and the rear cover.
