LW2 V6-3.0L VIN R (2000)
17.5. Install timing belt around timing belt tensioner and align marks on timing belt with corresponding marks on # 1 and #2 camshaft sprockets.
17.6. Install upper idler pulley. Tighten just enough to allow the pulley to rotate with slight resistance using idler pulley wrench J 42069-40.
18.
Reinstall crankshaft locking tool J 42069-10, and tighten lever arm to the water pump pulley flange.
19.
Adjust timing belt tensioner so that the center alignment mark is about 3 mm (1/8 in.) above alignment mark on spring loaded idler.
20.
Remove plastic wedge J 42069-30 from crankshaft sprocket.