LW2 V6-3.0L VIN R (2000)
64.
Install engine mount bracket and tighten bolts.
Tighten
Tighten the engine mount bracket bolts to 55 Nm (41 lb ft).
65.
Install engine mount to frame rail and engine mount bracket.
Tighten
Tighten the engine mount-to-bracket bolt to 55 Nm (41 lb ft).
66.
Remove engine support fixture.
Important:
Make sure vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist, provide additional
support for the opposite end from which components are being removed. Make sure hoist does not contact fuel or brake lines.
67.
Raise vehicle.