LW2 V6-3.0L VIN R (2000)
68.
Install splash shield.
69.
Install splash shield bolts. Tighten splash shield bolts until fully seated. Do not strip bolts
70.
Lower vehicle.
71.
Reconnect A/C pressure sensor electrical connector.
72.
Install air cleaner assembly.
72.1 Install air box. Ensure that lower pin engages into rubber mount grommet and that lower duct fits into resonator outlet.
72.2. Install air box mount bolt.
Tighten
Tighten the air box mount bolt to 6 Nm (53 lb in).
72.3. Install air cleaner.
