LW2 V6-3.0L VIN R (2000)
72.4 Install air cleaner lid. Ensure that the lid hinge is fully engaged in air box slots or the lid may not properly seal.
-
Install air cleaner lid, MAF sensor, and hose as an assembly.
-
Clamp air cleaner lid.
-
Slide flexible MAF hose and hose clamp on throttle body.
-
Tighten hose clamp.
72.5 Install EVAP purge valve assembly.
72.6.
Connect MAF electrical connection.
73.
Install EVAP purge line into clip on rear of strut tower.
74.
Reconnect negative battery cable.
Tighten
