LW2 V6-3.0L VIN R (2000)
11. Remove rear timing belt cover bolts.
12. Remove rear timing belt threaded pin.
13. Remove rear timing belt cover.
INSTALLATION
1. Install rear timing belt lever.
2. Coat threaded pin with Threadlocker Loctite (R) 242 compound or equivalent.
3. Install rear timing belt cover bolts.
-
Torque: 8 Nm (71 inch lbs.)
4. Install rear timing belt threaded pin.
-
Torque: 10 Nm (89 inch lbs.)
IMPORTANT: Tighten timing belt idler pulley bolt until snug. After the final timing belt adjustment are made, the bolt will be tightened to
specifications.
