LW2 V6-3.0L VIN R (2000)
6. Install rear exhaust manifold pipe to resonator bolts.
^
Torque: 20 Nm (15 ft. lbs.)
7. Tighten rear exhaust manifold pipe to exhaust manifold nuts
^
Torque: 30 Nm (25 ft. lbs.)
8. Lower vehicle
9. Install EGR pipe to exhaust manifold and EGR flange
^
Torque: 25 Nm (19 ft. lbs.)
NOTICE: Always use a nickel-based anti-seized compound (Saturn P/N 21485279 or equivalent) on the threads of the oxygen sensor If the oxygen
sensor is replaced, do not apply anti-seize to the new sensor New sensors have anti-seize pre-applied. Never use silicon product; silicon products will
cause damage to oxygen sensor.
10. Install oxygen sensor using J-39194C oxygen sensor socket.
^
Torque: 50 Nm (37 ft. lbs.)
11. Connect rear exhaust manifold pipe oxygen sensor electrical connections.
