LW2 V6-3.0L VIN R (2000)
3.
Remove left side I/P lower dash insulator retainers.
4.
Pull insulator rearward to detach from forward insulator retainers.
5.
Remove left side console extension.
6.
From driver's side of vehicle, wipe clean the bottom horizontal surface of the HVAC module.
7.
Peel backing off of hook and loop retainer and install delayed blower control module with wiring harness facing towards passenger side and ensure
back edge of delayed blower control module is flush with the side of the HVAC module. Press firmly to seat.