LW2 V6-3.0L VIN R (2000)
THE DRAIN OUTLET CONTACTS HOT ENGINE COMPONENTS. COOLING COIL COATING CAN CAUSE SUBSTANTIAL, BUT
TEMPORARY EYE INJURY. DO NOT GET COOLING COIL COATING IN EYES OR ON CLOTHING. WASH THOROUGHLY WITH SOAP
AND WATER AFTER HANDLING.
FIRST AID: IF COOLING COIL COATING GETS INTO EYES, HOLD EYELIDS OPEN AND FLUSH WITH A STEADY, GENTLE STREAM OF
WATER FOR 15 MINUTES. OBTAIN MEDICAL ATTENTION IF IRRITATION PERSISTS.
8.
Allow vehicle to cool down before performing cooling coil coating procedure.
9.
Remove right side console extension.
10.
Remove right side I/P lower dash insulator retainers.
11.
Pull insulator rearward to detach from forward insulator support.
12.
Remove insulator support from front of dash studs by pulling rearward.
