LW2 V6-3.0L VIN R (2000)
2.
Torque suction pipe-to-compressor bolt.
Torque:
Suction Pipe-to-Compressor
Bolt: 19 Nm (14 ft-lbs)
3.
Torque discharge line-to-compressor bolt.
Torque:
Discharge Line-to-Compressor
Bolt: 19 Nm (14 ft-lbs)
4.
Connect negative battery cable.
Torque:
Battery Terminal Bolt: 17 Nm (13 ft-lbs)
IMPORTANT:
Do not cover any existing underhood labels when affixing Campaign Completion Label.
5.
Affix Campaign Completion Label on a clean and dry surface of radiator core support, in an area clearly visible when hood is raised. (For more
information, refer to "Campaign Completion Label" in this bulletin.)
L81 - Torquing Procedure
1.
Disconnect negative battery cable.