LW2 V6-3.0L VIN R (2000)
18.
Install exhaust manifold pipe to exhaust manifold nuts.
19.
Position gasket between front and rear exhaust manifold pipes.
20.
Install front exhaust manifold pipe to rear exhaust manifold pipe bolts and tighten.
Torque:
Exhaust Manifold Pipe Bolts: 20 Nm (15 ft-lbs)
21.
Tighten exhaust manifold pipe to exhaust manifold nuts.
Torque:
Exhaust Manifold Pipe-to-Exhaust Manifold
Nuts: 30 Nm (25 ft-lbs)
22.
Route oxygen sensor wiring to top of engine.
