LW2 V6-3.0L VIN R (2000)
44. Remove steering wheel attachment nut and discard.
45. Install Steering Wheel Puller (KM-210-C or equivalent).
46. Remove steering wheel while feeding the wiring through the wheel opening.
NOTE:
^
Always align the front wheels to the straight-ahead position when installation or removing a coil assembly. If a coil is removed without
the wheels in a straight-ahead position and steering wheel has not been moved, the same coil assembly can be reinstalled if coil hub has
not been rotated.
^
If yellow tab is not available, use tape to prevent SIR coil from rotating.
47. Insert yellow tab or use a piece of tape to prevent rotating the SIR Coil.
