LW2 V6-3.0L VIN R (2000)
84. Open drivers side door completely and install protective covering on door inner hinge area to prevent damage to paint.
85. Using a flat blade screwdriver, remove the black plastic beam bolt covers.
NOTE: Use a T30 Torx(TM) socket to prevent stripping out head of bolt.
86. Using a TORX(TM) socket, remove both outer beam bolts. Use caution not to damage door paint.
NOTE: On wagons, the rear washer supply hose is routed through the drivers side A-pillar. Use care not to pinch or damage hose.
