LW2 V6-3.0L VIN R (2000)
74. Connect cruise control (if equipped) switch connectors and attach harness to wheel.
75. Connect inflator module wiring harness and install harness integral connector lock device.
76. Install inflator module into steering wheel. Be sure to seat all four attachment points.
77. Enable the SIR system. (Refer to "Enabling the SIR System" procedure.) See: Service Precautions/Vehicle Damage Warnings/Disabling and
Enabling the SIR System
78. Install heater inlet quick connect to heater inlet pipe (closest to driver's side). Holding quick connect by black collar, slide onto heater pipe. When
quick connect engages heater pipe bead, collar will slide towards front of dash and lock into position.
