LW2 V6-3.0L VIN R (2000)
7. Tighten rear axle control arm bolts using the torque angle method.
Torque: 90 Nm (65 ft. lbs.) + 30 - 45 degrees
8. Repeat procedure for other rear wheel.
REAR WHEEL ALIGNMENT
Rear wheel alignment involves setting the toe angle. Rear wheel camber is not adjustable.
IMPORTANT: Rear wheel alignment must be set correctly before front wheel alignment is attempted.
FRONT WHEEL CAMBER
IMPORTANT: Rear wheel alignment angles must be set to correct specifications before front wheel alignment angles are adjusted.
CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON HOIST. TO HELP AVOID
PERSONAL INJURY, PROVIDE ADDITIONAL SUPPORT FOR THE VEHICLE ON THE OPPOSITE END FROM WHICH
COMPONENTS ARE BEING REMOVED.