LW2 V6-3.0L VIN R (2000)
Coolant Line/Hose: Service and Repair
Head Degas Hose
REMOVAL
1. Disconnect negative battery cable.
2. Drain coolant. (Refer to "Draining Coolant".)
3. Remove head degas hose to surge tank clamp and remove hose from surge tank.
4. Remove head degas hose from UHJB clamps.
5. Remove hose from harness clamp.
6. Remove wiring harness from clamp.
7. Remove wiring harness bracket to intake manifold bolt.
8. Disconnect fuel injector inline connector.