LW2 V6-3.0L VIN R (2000)
4.5
Apply heat using U1tratorch(R) (or equivalent), heating splice sleeve to 175° C (347° F). Heat until glue flows around edges of splice
sleeve.
5.
Install new liftgate lock cylinder case. Refer to "Liftgate Lock Assembly" Installation procedure in the Locks and Security of the 2000
Body/Electrical Volume II Service Manual
PARTS REQUIREMENTS
CLAIM INFORMATION:
To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System for B5810 (Cylinder, Tailgate
Lock - R&R or Replace), or if another procedure is performed, refer to the appropriate Electronic Labor Time Guide for the correct Labor Operation
Code and Time.
DISCLAIMER