LW2 V6-3.0L VIN R (2000)
1. Connect BCM installing connector J4 (8-way) last.
2. Secure BCM module to glove compartment bin slots.
3. Route glove compartment lamp wiring harness through lamp opening.
4. Install glove compartment bin to I/P with fasteners.
Torque: 2.5 N.m (22 in-lbs)
5. Connect glove compartment lamp wiring harness to glove compartment lamp.
6. Snap lamp into glove compartment bin.
7. Install heater outlet with retainer.
