LW2 V6-3.0L VIN R (2000)
12.
Remove two front bolts from fuel tank straps and carefully lower front of tank far enough to access components on top. Support front of tank with
two under hoist jack stands or a transmission jack
NOTICE:
Care must be taken when removing the over pressure relief valve hose. The hose must not be cut. It must be pulled straight off valve. Any side to side
or up and down movement of the hose during removal can crack the valve and require fuel tank replacement.
13.
With the aid of an assistant to hold the tank steady, remove over pressure relief valve hose from over pressure relief valve by pulling straight off.
Discard hose.
NOTICE:
Hose clamp tangs must point up, toward underbody of vehicle.
