LW2 V6-3.0L VIN R (2000)
Notice:
Damaged or broken throttle body connector retainer clips may result with intermittent electrical connection and (MIL) Service Engine Soon Telltale
Lamp or Reduced Power Lamp illuminating.
48.
Install throttle body harness retainer, P/N 22729513, to throttle body motor.
49.
Position stand off clip inline with throttle body connector.
50.
Connect throttle body electrical connector.
51.
Insert throttle body harness into throttle body harness retainer, P/N 22729513, on throttle body motor.
52.
Connect negative battery cable.
Tighten
Tighten the Battery Terminal Bolts to 17 N.m (13 ft-lbs).
53.
Perform throttle body relearn procedure as follows:
^
Ignition "OFF" for 10 seconds
^
Ignition "ON", engine "OFF"
^
Make sure these engine operating parameters are met before proceeding:
-
ECT between 6° and 100° C (43° and 212° F)